Abstract This study aims to investigate the predictive value of SYNTAX score,SYNTAX score II and coronary artery calcium score on the prognosis of patients after PCI. The SYNTAX score, SYNTAX score II and coronary artery calcium score were calculated. The primary end point was major adverse cardiac and cerebrovascular events (MACCE). 195 patients were included, 182 patients were followed up and the median follow-up time was 34.5 months. The MACCE occurred in 30 patients. The incidence of MACCE of lower risk, medium risk and high risk were: SYNTAX score: 6.7%, 18.3%, 24.2%; coronary artery calcium score: 9.7%, 18.3%, 21.7%; SYNTAX score II: 6.6%, 16.4%, 26.7%; new combined risk score: 7.7%, 8.1%, and 35.8%. ROC analysis showed that SYNTAX score (AUC: 0.641, 95%CI: 0.540-0.743), coronary artery calcium score (AUC: 0.597, 95%CI: 0.490 -0.704), SYNTAX score II (AUC: 0.662, 95%CI: 0.561 - 0.763), new combined risk score (0.711, 95%CI: 0.606 - 0.816). The new combined risk score tended to be superior compared to other risk score (p<0.01). The results suggested that SYNTAX score, SYNTAX score II and new combined risk score can predict the occurrence of MACCE after PCI, new combined risk score provides superior prediction.

Abstract To study the failure modes, bearing capacity, ductility, and sleeve strain of grouted sleeve lapping connectors, 36 specimens were tested under uniaxial tensile load. The test results show that the sleeves are under longitudinal tension at the beginning, which changes to longitudinal compression in the late stage of loading, and the changing load increases gradually with the lap length. The force transmission path and mechanical mechanism of the connectors are analyzed. The distribution and development process of longitudinal sleeve stress is analyzed based on the constitutive model stress, and it is found that the sleeve changes from longitudinal tension to longitudinal compression at the late loading stage, which is consistent with the test results. Based on the test, the calculation formulas of the ultimate bond strength and critical lap length of the grouted sleeve lapping connector are proposed. The research results lay a theoretical foundation for the application of grouted sleeve lapping connectors.

Abstract Objectives: To assess the ability of monoclonal antibodies (mAbs) specific for fibronectin extra-domain A (FnEDA) to target diseased tissues of mouse collagen induced arthritis (mCIA) models. To explore the parameters of the targeting exhibited by anti-FnEDA mAbs including timing and location. Methods: Targeting capabilities of anti-FnEDA mAbs were demonstrated by biodistribution study where i.v. injected antibodies were detected by conjugated near-infrared (NIR) fluorophore, 125I label and immunohistochemistry (IHC) of the injected antibody. Location of FnEDA expression in both mCIA and human RA tissue were mapped by IHC. Quantification of anti-FnEDA mAbs targeted to disease tissue was measured by whole-body autoradiography (WBA). Timing of the targeting was interrogated with fluorescent and confocal microscopy using anti-FnEDA mAbs labeled with different fluorophores and injected at different times. Results: Anti-FnEDA mAbs show specific targeting to diseased paws of mCIA animal. The targeting was focused on inflamed synovium which is consistent with FnEDA expression profile in both mCIA and human RA tissues. Anti-FnEDA mAbs accumulated in diseased tissue at pharmacologically relevant concentrations, the targeting was sustained for up to 14 days and FnEDA was able to support targeting of multiple doses of anti-FnEDA mAbs given 5 days apart. Conclusion: FnEDA is specifically upregulated in the inflamed tissues of mCIA. Antibodies specific for FnEDA can be useful as molecular delivery vehicles for disease specific targeting of payloads to inflamed joint tissue.

Abstract The butt welding tests of 5.5mm thick pure nickel N6 plate were carried out by plasma arc welding (PAW) and ERNi-1wire-filled PAW. And the differences in microstructure and properties between two kinds of joints were studied. The results show that the wire-filled pure nickel N6 joint has good appearance without defects such as pores, cracks, and undercuts. Pure nickel N6 weld is single-phase austenite structure, and no phase transformation occurs during heating or cooling. The weld zone of PAW joint is characterized by coarse columnar grain with average grain size of 125.8 μm, while the weld zone of wire-filled joint is equiaxed grain with average grain size of 54.8 μm. The tensile strength of the wire-filled PAW joint is 337MPa and the elongation after fracture is 44%, which is 11.6% and 85.5% higher than that of the PAW joint. The corrosion rate of wire-filled PAW joint is 2.6908g/m2h, which is lower than that of PAW joint of2.8820g/m2h, and the corrosion rates of both joint are higher than the base metal. The alloy elements in the welding wire can supplement the alloy elements burned in the welding process. As the filler metal, the melted wire forms the joint with the melted base metal, avoiding the defects such as undercut and depression. Al and Ti elements in ERNi-1 wire have deoxidation and nitrogen fixation effect during welding thermal cycle process, which improves the resistance of weld to carbon monoxide and nitrogen porosity. In the process of nitrogen fixation, TiN particles are formed in the crystal or grain boundary. TiN particles at the grain becomes heterogeneous nucleation particles in the grain, which makes a large number of nucleation and increases the nucleation rate. TiN particles at grain boundaries act as "nails" to hinder the migration of austenite grain boundaries. In the deoxidization process, the deoxidized products Al2O3 and TiO2 are formed. However, large-size inclusions are formed owing to the high content of Al and Ti in the molten pool, which affects the performance of the joint. Therefore, the structure and performance of filler wire-filled PAW joint are better than those of PAW joint.

OBJECTIVES: Previous studies have not shown any correlation between bile acid metabolism and bone mineral density (BMD) in women with postmenopausal osteoporosis. Thus, the current study evaluated the association between bile acid levels as well as BMD and bone turnover marker levels in this group of women. METHODS: This single-center cross-sectional study included 150 postmenopausal Chinese women. According to BMD, the participants were divided into three groups: osteoporosis group, osteopenia group, and healthy control group. Serum bile acid, fibroblast growth factor 19 (FGF19), and bone turnover biomarker levels were assessed. Moreover, the concentrations of parathyroid hormone, 25-hydroxy vitamin D [25(OH)D], procollagen type I N-peptide (P1NP), and beta-CrossLaps of type I collagen containing cross-linked C-terminal telopeptide (β-CTX) were evaluated. The BMD of the lumbar spine and proximal femur were examined via dual-energy X-ray absorptiometry. RESULTS: The serum total bile acid levels in the osteoporosis and osteopenia groups (5.28±1.56 and 5.31±1.56 umol/L, respectively) were significantly lower than that in the healthy control group (6.33±2.04 umol/L; p=0.002 and 0.018, respectively). Serum bile acid level was positively associated with the BMD of the lumbar spine, femoral neck, and total hip. However, it negatively correlated with β-CTX concentration. Moreover, no correlation was observed between bile acid and P1NP levels, and the levels of the other biomarkers that were measured did not differ between the groups. CONCLUSION: Serum bile acid was positively correlated with BMD and negatively correlated with bone turnover biomarkers reflecting bone absorption in postmenopausal women. Thus, bile acid may play an important role in bone metabolism.

ABSTRACT Background: Alternative splicing (AS), which plays an important role in gene expression and functional regulation, has been analyzed on genome-scale by various bioinformatic approaches based on RNA-seq data. Compared with the huge number of studies on mouse, the AS researches approaching the rat, whose genome is intermedia between mouse and human, were still limited. To enrich the knowledge on AS events in rodents' brain, we perfomed a comprehensive analysis on four transcriptome libraries (mouse cerebrum, mouse cerebellum, rat cerebrum, and rat cerebellum), recruiting high-throughput sequencing technology. An optimized exon-exon junction library approach was introduced to adapt the longer RNA-seq reads and to improve mapping efficiency. Results: In total, 7,106 mouse genes and 2,734 rat genes were differentially expressed between cerebrum and cerebellum, while 7,125 mouse genes and 1,795 rat genes exhibited varieties on transcript variant level. Only half of the differentially expressed exon-exon junctions could be reflected at gene expression level. Functional cluster analysis showed that 32 pathways in mouse and 9 pathways in rat were significantly enriched, and 6 of them were in both. Interestingly, some differentially expressed transcript variants did not show difference on gene expression level, such as PLCβ1 and Kcnma1. Conclusion: Our work provided a case study of a novel exon-exon junction strategy to analyze the expression of genes and isoforms, helping us understand which transcript contributes to the overall expression and further functional change.